中文版
English
About Zhou Tai
为客户提供优质的产品！
News Center
Muffler check valve performance specifications
发布日期：2017-11-24 22:57:00 点击数：1925 次
Muffler check valve performance specifications
Model Nominal pressure MPa Shell test pressure MPa Seal test pressure MPa Applicable medium Operating temperature ℃
 
H41X-10 1.0 1.5 1.1 Water and weak corrosive fluid ≤80
H41X-16 1.6 2.4 1.76 Water and weak corrosive fluid ≤80
Muffler check valve main parts material
Model body seal spring
H41X-10 cast iron or stainless steel nitrile rubber (NBR) stainless steel wire lCr18Ni9Ti
 
H41X-16 cast steel or stainless steel nitrile rubber (NBR) stainless steel wire lCr18Ni9Ti
C
ONTACT US
联系我们
Wenzhou Zhou Thai Valve Tube Co., Ltd.
Address: Wenzhou Economic and Technological Development Zone Binhai Park Road 700 two
Tel: 0577-86993696
hotline：0577-86999559
Fax: 0577-86993698
E-mail: santhaivalve@163.com
Website: www.santhaivalve.com www.cnsanthai.cn www.santhaivalve.cn
Chinese website: www. Zhou Thai valve. Com www. Zhou Thai valve
English website: www.cnsanthai.com
  • 验证码：
    • Copyright 2017 Wenzhou Zhou Thai Valve Tube Co., Ltd. All Rights Reserved. tel：0577-86993696 fax： 0577-86993698 Phone：